Time & Attendance is made Easy & manageable with irrefutable personal
Identification using “Touch-n-Go” Biometric Finger Print Technology. There
is no need to produce ID cards with real time identification result in
1:N Mode. MicroBEN Bio is self contained device with FVC Award Winning Finger
Print Sensor to enroll & store their Finger record, Identify users,
save event logs & provides interface with Computer for generating MIS
Attendance Reports and data required for Payroll Calculation.
A RFID based HID Proximity Reader may be included. MicroBEN_Bio provides
superior speed and most importantly eliminates Buddy/Proxy Punching. Only authorized
personnel are allowed access to the protected area or to Clock IN/OUT. All the
exacting demands to cater the Medium organisations and high security premises
are packed in this affordable device.
With a RF based HID Reader (optional), Finger Print Module and Key Pad
, it gives the operator a choice of access modes in any combination of Fingerprint,
Card and PIN entries.
OPERATION
● Finger Print enrollment using MicroBEN_Bio (built-in memory) terminal
is done once.
● User places their enrolled Finger on the Finger sensor for clocking
IN/OUT.
● The terminal compares live finger with the finger stored on built-in
memory and then stores Attendance data only upon “MATCH “.
● LCD displays Employee Name, and “Allowed” message
upon authentication (with Date & Time).
● Optional : The Proximity is shown on the card reader. If the card
is valid, user is prompted to put the finger on fingerprint reader.
● User friendly Reports can be generated by TimePro Software ,
a high end Attendance Analysis software (optional).
COMMUNICATION
Networking of Terminals can be accomplished via
the RS 232C/ RS485/Ethernet (LAN/WAN)/WiFi or dial
up modem communication using suitable External Hardware.The
data stored in MicroBEN_Bio is downloaded
by Compro 2000, a Windows based Configuration software
on any of the above mentioned connectivity.
Technical Data
Finger ID Sensor Specification
- CPU: 400MHz DSP CPU / 1MB Memory with 1900 Finger
data storage
- Enrollment Time: 800ms for finger capture (Typical)
- Identification Time (1:N): <1 Sec. (Typical) for
1000 Fingers
- Template Memory : 950 Users(2 Finger each) upgradable
to 2000 Users
- Allowable Finger Rotation: +/- 90 Degree
- Allowable Finger Displacement: +/- 5mm
- Sensor: Optical (16mm X 19mm)
- Image Size: 280 X 320 pixel, 500 DPI
- Finger Template Size: 256 Bytes with Encryption AES
(FP Data Protection)
- Minutiae-only Template Extraction Algorithm with
EER: <0.1%
Technical Specification
- Memory: 10000 Transaction Storage
- Template Memory : 950 Users(2 Finger each) upgradable
to 2000 Users
- Battery Back-up: Retention of Clock & Data Upto
10 Years
- Communication : RS232C or RS485 (Optional Ethernet/
WiFi)
- Data Upload Speed: 1000 Records/ Minute (9600BPS)
- Card Reader Input: Contactless HID Proximity Card
Reader(Optional)
- Keyboard: 4X4 Key Membrane Key Keyboard
- Display: 16 X 2 Character Backlit LCD
- Access Control : Potential Free Contact O/P & ReX
(Request-to-Exit) input
Environmental Specification
- Power: Wide Range SMPS Adapter (110-260V@50Hz +/-5Hz)
- Dimension: 146 (H) X 154 (W) X 53 (D) mm
- Enclosure: Dust Resistant Sleek ABS enclosure
- Operating Temperature: 0-50 Degree Centigrade
Ordering Information
- MicroBEN Bio : Finger Print based
Attendance/Access System in 1:N mode with RS232C/RS485
Port
- FIPL 150 : Built-in EM Proximity
Reader for MicroBEN Bio
- FIPL 200 : Built-in HID Proximity
Reader for MicroBEN Bio
- FIPL 300 : Built-in MIFARE Smart
Card Reader for MicroBEN Bio
- FIPL 400 : Built-in HID iClass Smart Card Reader for MicroBEN Bio
- In-Circuit TCP/IP : Built-in Ethernet
Interface for MicroBEN_Bio
- COMCON : RS 232C to RS485 Converter
- COMCON Wifi : RS232C to Wifi Converter
- COMCON Blue Tooth : RS232C Blue Tooth Converter
- MIS Time Pro LITE: Time
Office Report Generation Software suitable for Office
(Single Shift Operation)
- MIS Time Pro ENTERPRISE:
Time Office Report Generation Software suitable for
Factory/Large Enterprise (Multi Shift Operation)
- PayLITE: Pay Roll Calculation & Generation
Software
- ID Cards: (a) HID Prox Card (b)
EM Prox Card
- Door Lock: (a)Strike
(b)EM Lock (c)Turnstile (d)Drop Bolt (e)Boom Barrier
- Accessories: (a)RS232C/RS485/CAT
6 Comm. Cable (b) ReX Switch
|
